How to Use the “Re-Sync Activity” Tool in Garmin Connect

If a run, ride, or workout appears in your Garmin watch’s history but never shows up in the Garmin Connect app, the automatic sync pipeline has stalled. Garmin Connect does not feature a single, universal button labeled “Re-Sync Activity” inside the mobile interface. Instead, re-syncing a missing workout requires triggering a manual Bluetooth sync from the device’s hardware menu, using Garmin Express on a computer, or manually importing the raw .FIT file into the Garmin Connect web portal.

Quick Answer

To re-sync a missing activity, hold the Light button on your watch to open the Controls menu, select the Sync icon, and keep Garmin Connect open on your phone. If the workout still does not transfer, connect the watch to a computer with its charging cable, launch Garmin Express, or manually upload the .FIT file at connect.garmin.com.


Device & Signal Snapshot

  • Affected Platform: Garmin Connect (Mobile App, Web Portal, Garmin Express)
  • Affected Devices: Garmin Forerunner, Fenix, Epix, Venu, Instinct, and Edge series
  • Function: Activity file transmission (.FIT payload transfer)
  • Severity: Low to Moderate (The activity file is safe on the watch storage, but cloud sync and third-party exports like Strava are blocked)

What Is Actually Happening?

When you save an activity, your Garmin watch compiles sensor readings, GPS tracks, and biometric data into an encrypted binary file with a .FIT extension, stored in the watch’s internal GARMIN/ACTIVITY directory.

Under normal conditions, your watch establishes a Bluetooth Low Energy (BLE) connection with the Garmin Connect app and checks a “sync bookmark.” If the BLE connection drops mid-transfer, or if a brief server timeout occurs, the app may advance its sync pointer without actually ingesting the workout file. When this happens, future regular syncs only check for new data, leaving the unsynced activity stranded in the watch’s onboard memory.


How to Re-Sync the Activity

Depending on whether you have only your phone or access to a computer, follow these progressive methods to force Garmin Connect to re-read the stranded workout.

                  Unsynced Activity on Watch
                              │
                              ▼
            Method 1: Watch Controls "Sync" Icon
                              │
                    ┌─────────┴─────────┐
                 Success              Fails
                    │                   │
                 Resolved               ▼
                              Method 2: Garmin Express
                                  (USB to PC/Mac)
                                        │
                              ┌─────────┴─────────┐
                           Success              Fails
                              │                   │
                           Resolved               ▼
                                        Method 3: Manual .FIT
                                            Web Import

Method 1: Force a Hardware-Initiated Sync via the Controls Menu

Initiating a sync from the watch forces a deeper handshake than simply pulling down to refresh the phone screen.

  1. Keep your smartphone awake with the Garmin Connect app open in the foreground.
  2. On your watch, press and hold the Light (Power) button for 2 seconds to bring up the circular Controls Menu.
  3. Scroll to the Sync icon (represented by two circular arrows).
  4. Press the Start/Stop button to execute the sync.
  5. Watch the outer ring of the watch face. A green confirmation bar or checkmark indicates the device forced all pending memory blocks across the BLE link. Check your app to confirm the activity loaded.

Method 2: The Garmin Express Desktop Override

If Bluetooth packets fail to transfer the file, a hardwired USB connection will bypass mobile operating system restrictions.

  1. Connect your Garmin watch to a PC or Mac using your charging/data cable.
  2. Open Garmin Express.
  3. Select your device tile and click Sync.
  4. Garmin Express communicates directly with Garmin’s cloud servers over your computer’s internet connection, scanning the GARMIN/ACTIVITY folder for files that have not yet registered on the server.

If Garmin Express displays a communication fault during this step, check Garmin Express “Error Transferring Files”: The USB-C Data Cable Check.

Method 3: Manual Extraction and Web Import (The Guaranteed Fix)

If the watch registers the file as “already synced” but the server never received it, you can upload the raw activity file directly.

  1. Plug your watch into your computer using the USB cable.
  2. Open your file explorer (File Explorer on Windows, or Android File Transfer / OpenMTP on macOS).
  3. Open the drive labeled GARMIN, navigate to the GARMIN folder, and open the ACTIVITY folder.
  4. Locate the missing activity file. Files are named by date and time in the format YYYY-MM-DD-HH-MM-SS.FIT. Sort by Date Modified to find your recent workout.
  5. Copy the .FIT file to your computer’s desktop.
  6. Open a web browser and go to connect.garmin.com.
  7. Log into your account, click the Cloud with an Arrow (Upload/Import) icon in the top-right menu, and select Import Data.
  8. Drag the .FIT file from your desktop into the upload box and click Import Data.

What to Check If That Doesn’t Work

Closing

When a Garmin activity goes missing from your app, avoid resetting your watch; as long as the workout is in your watch history, the .FIT file remains intact on the storage drive and can always be retrieved manually via Garmin Connect Web.